EasyFlip Launching Wheels

Description

EasyFlip Dinghy Launching Wheels.

A set of 2 compact Dinghy launching wheels suitable for fitting onto wooden, fibreglass or aluminium transom. Very convenient when transferring the boat to the launching site, specially with an outboard attached and other equipment in the boat.

Features:

• The wheel arm can rotate and fold flat against the transom when in the up position (for boat launching).
• Folding design suited for boats with outboard engines, allowing a wider range of tiller movement.
• Wheels can be left on the transom when the boat is deflated and packed for transport or storage.

Construction:

• Stainless steel bracket with puncture-proof polyurethane tyres. Non-puncture wheels. Wheel diameter 200mm. Wheel width 65mm. Overall weight 4kg (approx).

 Measuring Guide:

• Check transom minimum size: More than 450mm wide. More than 370mm high.  Maximum thickness 50mm.
• Size of Stainless Steel fixing Base (to attach on the transom): 155mm (h) x 35mm (w)
• Ground Clearance, (from the bottom of the fixing base): 250 mm
• Overall height from the top of the fixing bracket to the ground: 400mm

Installation Notes:

• On first use, apply marine grease on the wheel axle sleeve and the spring slider mechanism to ensure smooth operation.
• Failure to fit Part (C) inside the fixing bracket will cause the wheel to wobble.
• Use marine-grade sealant around holes drilled in the transom.

Box Contains:

• Set to 2 launching wheels. Stainless steel fixing bolts. Fitting Instructions.

Max Payload: 200kg. Not suitable for vehicle towing.